Taps  |  Shoes & Boots  |  Petticoats & Pettipants  |  Clogging Music  |  Teaching Videos
Other Products  |  Contact Us  |  Home

 

Attaching Your STEVENS STOMPERS®
Nail-On Clogging Taps

(See link at bottom for a printer-friendly version of this page.)

    

      You can print out our tri-fold Tap Install Brochure.

      Nail-on taps have holes which allow you to attach taps to shoes with nails (see lasts below) or screws.  The nail access holes have been carefully designed and located so as to resist the backing out of the nail.   

     If a nail is properly installed (on an angle) and should start to back out, the position of the access hole, in conjunction with the action of the hinge, allows the  floor-half of the tap to drive the nail back in while dancing.  This, of course, reduces the chances of a nail scratching the floor, without sacrificing any of the long life or superb sound of the tap.  

     Of course, vigorous dancing or dancing on rough surfaces can cause a nail to back out.  It is important to check (See Tap/Shoe Check page) your taps weekly and drive back in any loose nails.  Loose nails can make dancing unsafe, lead to taps coming off, or damage floor surfaces.  Be sure to keep all nails properly maintained.

    Please request a free install instruction sheet for more detailed instructions.  Request nail-on taps to attach using this method.  

      Each set of taps you order will come as a complete set (with 2 toes and 2 heels per set).  Your set will, also, include nails.  You, or your shoe repair shop, can nail the taps on using an iron shoe last - see below.  
If you wish to attach taps with screws, a packet of screws can be purchased at slightly extra cost - see below.
We Recommend the...  EMPIRE LAST
15" Last Stand $21.80*
24" Last Stand $27.80*
#1 LAST - Small Children's - 6" $7.70*
#2 LAST - Small Ladies & Children's - 7 $9.90*
#3 LAST - Men's and Large Ladies' - 9 $11.80*
#4 LAST - Large Men's - 10" $14.80*
Also available:
DRAGON LAST
Durable - Made of one solid piece

$26.00 *

(Screws shown above are not actual size)
Screw Kit - (Use a thin-bladed screwdriver to install)
High quality, machined screws are needed for attaching taps to shoes.  You will also need to be sure that the soles of the shoes you are attaching to are sturdy enough to hold screws.  #429  
1-3 Kit(s)  -  $1.10* each 4 or more Kits  -  $1.00* each

* Prices where noted are in US Dollars and do not include shoes or 
shipping and handling charges.

 

Return to Stevens Clogging Supplies Tap Page.

 

Return to Stevens Clogging Supplies Home Page.

 

 

Click for printer-friendly version of this page

 

Your Clogging Supply Place:

Stevens Clogging Supplies, Inc.
P.O. Box 112  ·  49 Franklin Road
Mercer, Pennsylvania 16137  USA

Call Toll Free USA & Canada
1.800.722.8040 USA  ·  1.800.544.7824  CAN
1.800.531.9335 FAX

Overseas
Phone: 1.724.662.0808  ·  FAX: 1.724.662.2050

Copyright © 1996 - 2008 Stevens Clogging Supplies, Inc.